

Pile Load Testing
Namotech provides pile load testing services to verify the load-carrying capacity and settlement behaviour of piles used in building, bridge, industrial and infrastructure foundations. Our testing follows IS 2911 procedures and supports foundation design validation.
What is Pile Load Testing?
Pile load testing is a field test that applies a known load to a pile (compression, tension or lateral) and measures the resulting settlement or displacement. It verifies that piles can safely carry the design load and confirms the adequacy of pile design and construction.
Why is Pile Load Testing Required?
What Namotech Provides
Testing Methodology
Test Setup
Reaction system arrangement (kentledge or anchor piles), dial gauge and hydraulic jack installation
Loading Stages
Incremental loading per IS 2911 maintained load test procedure (20% increments of test load)
Settlement Monitoring
Continuous dial gauge readings at prescribed time intervals for each load increment
Unloading & Recovery
Systematic unloading and measurement of rebound/recovery
Analysis & Reporting
Load-settlement curve plotting, safe load determination and compliance assessment
Industries & Applications
FREQUENTLY ASKED QUESTIONS
Initial (test) piles are loaded to 2.5x working load to determine ultimate capacity. Routine (working) piles are loaded to 1.5x working load to verify that production piles meet design requirements.
A maintained load test typically takes 3-5 days including setup. Each load increment is maintained for specified time periods (typically 1-2 hours for routine tests, longer for initial tests) until settlement stabilizes.
We test bored cast-in-situ piles, driven precast piles, micropiles, sheet piles and ground anchors. Our hydraulic loading systems can accommodate test loads from 50 tonnes to 1000+ tonnes.
NEED PILE LOAD TESTING?
Contact Namotech to discuss your pile load testing requirements. Our engineering team will assess your project needs and provide a tailored approach.

